3D wire mech wall panel machine

Description:

3D wire mesh panel machine
1.PLC touch screen, Vertical design
2.Product size:3000*1220*50-100mm
3.Panel used as house wall

3D wire mech panelmachine

Description:

1.Related elctricpower:75Kva/KBT

2.Input supply:AV380V50HZ

3.Air compressor:3m3/minute0.6MPA

4.Cutting wire structure:single or double sidemesh different densities

5.Productsize:(L*W*T):3000*1220*50-100mm

Characteristics:

1. Vertical Desined

The whole production line is vertical designed.It settle thehigh lack-welding rate problem of horizontal type.It makesoperation and maintenance much easier.

 

2. Unique wire-threading mechanism

Cut short wire in advance and insert it into polystyrene panelby wire-threading multiple disadvantages of cutting while weldingbeside the machine.

 

3. Smart Welding Holder

It makes the weld pressure more evenly and more strongly so thatthe solder joint can be steady.

 

4. Smooth and Steady continous operation

The length of net sheet is equal to the length of polystyrenepanel.So the connection of panel to panel is more convenient.Thefirst panel can easily separate from the next one after welded.

 

5. Wide choice of core material

The core material could be complete-panel-type rock(mineral)wool, polystyrene, expanded perlite and so on.The application ofrock(mineral)wool and expanded perlite could rise the fireproofinglevel of light sandwich panel.

 

6. Wide choice of panel type

There are many choice of the panel length and the thickness ofthe core material.The three types of panel could meet differentneeds of users.It can be made of special shape such as curved paneland so on.It also can be use as floorslab or roof boarding.

Finished products:

 

Case of using the 3D wire mesh buildinghouse

 

The 3D Panel production line including 3DW-A Steel Net Welding MachineUnit and CH-ISteel Net Light Sandwich Panel Inserted Wire Welding MachineUnit.

 

Part A: 3DW-ASteel Net Welding Machine

It is highly automated and controlled by PLC system.

Welded wire mesh size: Φ2.03-2.5mm

Length within 3.5 m can be cut by automatic cutting, length over3.5 m should be declared in advance.

Welding speed 55 steps/min, capacity 3.3m2/min.

 

Part B: CH-I Steel Net Light Sandwich Panel InsertedWire Welding Machine Unit.

Length 2.4m-3.5m (or by discussion), width 1200mm,

Core block thickness:50mmn, 60mm, 70mm, 80mm, 90mm, 100mm

 

3D wire mech wall panel machine